GETTING STARTED FROM YOUR HARD DISK
          1. Boot your computer normally.
          2. Exit to the DOS prompt if necessary.
          3. Create a new directory on your hard drive for
             RESCUE ROVER 1, then copy the contents of the
             floppy to that directory. You may do this with these DOS
             commands (assuming hard drive C and floppy drive A):

               C:
               MD \ROVER1
               CD \ROVER1
               COPY A:*.*
            
             or use your own menu or shell program. If you are unsure
             about doing this, refer to your DOS manual or call
             Softdisk Technical Support at 1-318-221-8311.
          4. From your new directory, type START, then press Enter
             to run RESCUE ROVER 1.

                 [Press <Print Screen> to print this page now.]